Results 1 to 1 of 1

Thread: Multiview T-35 Firmware Version 03.14_101076 For Hardware ID (HWID) G & H

  1. #1

    Multiview T-35 Firmware Version 03.14_101076 For Hardware ID (HWID) G & H

    This Firmware should only be used for Multiview T-35 units with Hardware ID (HWID) "G" & "H".

    The firmware is for the latest "slim" version (approx. 1" height) of the Multiview T-35 with an orange LED on the front panel.
    Click the picture link to see a picture of the correct Multiview version.

    multiview_t35_01_120521.jpg

    For models with HWID below G see other Firmware section.

    Full details on the upgrade procedure are in the RSDEdit section.

    http://www.rsdtv.com/rcms/showthread...-the-Multiview

    Change Notes:

    1. Default teletext mode changed to "Live Teletext".
    2. EPG improved to allow more EPG within teletext pages to reduce the amount of pages that EPG is over.
    3. Watchdog function updated (13062014).
    Attached Files Attached Files

Similar Threads

  1. Multiview T-35 Firmware Version 03.13_101082 For Hardware ID (HWID) up to E02
    By CMS_ADMIN in forum Multiview T-35 DVB-T 5 Channel Head End
    Replies: 0
    Last Post: 15th January 2014, 11:49 AM
  2. Multiview T-35 User Manual For Hardware ID (HWID) greater than "G"
    By CMS_ADMIN in forum Multiview T-35 DVB-T 5 Channel Head End
    Replies: 0
    Last Post: 26th June 2012, 10:25 PM
  3. Multiview T-35 User Manual For Hardware ID (HWID) up to "F01"
    By CMS_ADMIN in forum Multiview T-35 DVB-T 5 Channel Head End
    Replies: 0
    Last Post: 18th March 2012, 04:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •